Additive Manufacturing Innovation Centre (AMIC) publications
Explore some of the technical publications, by AMIC staff, in scientific journals and at conferences:
Force enhanced wire laser additive manufacturing of aluminum and titanium alloys– Zhe Zhao, Shuoheng Xu, Jian Liu et al. Journal of Alloys and Compounds, Vol. 938, 168617, 25.03.2023.
Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process – Yin, Allice Tan Mun, Rahim, Shayfull Zamree Bin Abd Abdullah, Mohd Mustafa Al Bakri et al. Materials, Vol. 16, No. 4, 1724, 19.02.2023.
Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method – Armin Yousefi Kanani, Xing Er Wang, Xiaonan Hou et al. Engineering Structures, Vol. 277, 115428, 15.02.2023.
Additively manufactured foamed polylactic acid for lightweight structures– Armin Yousefi Kanani, Allan Rennie, Shayfull Zamree Bin Abd Rahim. Rapid Prototyping Journal, Vol. 29, No. 1, 02.01.2023, p. 50-66.
Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel – Haitao Zhu, Allan Rennie, Ruifeng Li et al. Surfaces and Interfaces, Vol. 35, 102442, 31.12.2022.
Irregular Shape Effect of Brass and Copper Filler on the Properties of Metal Epoxy Composite (MEC) for Rapid Tooling Application –Radhwan Hussin, Safian Sharif, Rahim, Shayfull Zamree Bin Abd Rahim et al.Journal of Manufacturing and Materials Processing, Vol. 6, No. 6, 134, 02.11.2022.
A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling–Armin Yousefi Kanani, Allan Rennie, Shayfull Zamree Bin Abd Rahim. Journal of Materials Research and Technology, Vol. 20, 30.09.2022, p. 2841-2858.
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review – Nurul Hidayah Mohamad Huzaim, Shayfull Rahim, Luqman Musa et al. Materials, Vol. 15, No. 10, 3725, 23.05.2022.
Mass optimisation of 3D-printed specimens using multivariable regression analysis – Cristian-Vasile Doicin, Mihaela-Elena Ulmeanu, Allan Rennie et al. International Journal of Rapid Manufacturing, Vol. 10, No. 1, 31.12.2021, p. 1-22.
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges – Seymur Hasanov, Suhas Alkunte, Mithila Rajeshirke et al. Journal of Manufacturing and Materials Processing, Vol. 6, No. 1, 4, 27.12.2021.
Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry – Menna El Kashouty, Allan Rennie, Mootaz Ghazy et al. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 235, No. 23, 989382, 01.12.2021.
Different Approaches for Manufacturing Ti-6Al-4V Alloy with Triply Periodic Minimal Surface Sheet-Based Structures by Electron Beam Melting – Dmitry Khrapov, Maria Kozadayeva, Kayrat Manabaev et al. Materials, Vol. 14, No. 17, 4912, 29.08.2021.
Machine Learning for Additive Manufacturing – Dean Grierson, Allan Rennie, Stephen Quayle. Encyclopedia, Vol. 1, No. 3, 19.07.2021, p. 576-588.
Powder Characterization – Methods, Standards and State of the Art – Robert Groarke, R K Vijayaraghavan, Dan Powell et al. Fundamentals of Laser Powder Bed Fusion of Metals. 2021. p. 491-527.
Additive manufacturing of multielectrode arrays for biotechnological applications – Amelia Edwards, Christopher Hann, Henry Ivill et al. Materials Advances, Vol. 2021, No. 2, 07.03.2021, p. 1600-1605.
An Efficient Triangle Mesh Slicing Algorithm for All Topologies in Additive Manufacturing – Beth King, Allan Rennie, Graham R Bennett. International Journal of Advanced Manufacturing Technology, Vol. 112, 01.01.2021, p. 1023-1033.