CSWIP Welding Inspector

Contact Us

CSWIP Welding Inspector 2024 Regional Training Schedule

Is it for me?

The CSWIP Welding Inspector course is designed for inspection engineers and supervisors.

Those with little or no previous welding experience are advised to attend the Certificate in Visual Inspection of Welds course to prepare for this course. 

What will I learn?

This course will teach you the duties and responsibilities of a welding inspector including fusion welding processes, typical weld defects, types of steel (including carbon-manganese, low alloy and stainless steels), the hardening of steels, weldability, heat treatment, and parent metal defects.

 The programme also includes visual inspection, the testing of parent metals and welds, and destructive and non-destructive test techniques.

You will also learn welder and procedure approval, codes and standards, and an outline of safe working practices. 

There will also be the opportunity to practice examination questions while undergoing continuous and end-of-course assessment. If you meet the CSWIP requirements for eligibility, you will be able to complete the relevant CSWIP examination on day 5 of the course.

In addition, you can purchase TWI’s online CSWIP Welding Inspector Pre-Learning package which prepares them for the course.

What will I leave with?

By the end of the course you should be able to:

  • Understand factors which influence the quality of fusion welds in steels 
  • Recognise characteristics of commonly used welding processes in relation to quality control 
  • Interpret drawing instructions and symbols to ensure that specifications are met 
  • Set up and report on inspection of welds, macrosections, and other mechanical tests
  • Assess and report on welds to acceptance levels 
  • Confirm that incoming material meets stipulated requirements and recognise the effects on weld quality of departure from specification 
  • Be in a position to pass the Welding Inspector examinations

What else should I know?

  • CSWIP Welding Inspector examination - All candidates must attend a CSWIP approved course of training prior to examination. Enrolment on this course does not constitute reservation of an examination. All courses may be followed by a CSWIP Welding Inspector examination for candidates with appropriate experience - as specified in CSWIP document WI-6-92
  •  In addition, candidates can purchase TWI’s online CSWIP Welding Inspector Pre-Learning package which prepares them for the course
  •  All CSWIP documents are available at www.cswip.com.

  ENTRY REQUIREMENTS

  • Welding Inspector for a minimum of 3 years with experience related to the duties and responsibilities listed in Clause 1.2.2 of CSWIP document WI-6-92, under qualified supervision, independently verified OR
  • Certified Visual Welding Inspector for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2 of CSWIP document WI-6-92 OR
  • Welding Instructor or Welding Foreman/Supervisor for a minimum of one year
  • For Mature Candidate Route offering exemption from formal training, refer to Clause 1.4.2 of document WI-6-92 available at www.cswip.com.

In addition to all the above, candidates must comply withClause 1.3.4 of document WI-6-92 available at www.cswip.com.

All experience will need to be verified by either yourprevious/present employer/company.

Alternative Training Modes 

 

 

For more infomation please email:


enquiries@twime.com